1A-100
7/8" In Stock
This is the Billet Internal Adapter for the Arrow, Hindsight, Hindsight LS and Blindsight Billet Bar End Mirrors. CRG make this assembly to offer an alternative to the basic Bar End Mirror mount.* This assembly will work on bars with internal diameters as small as 12mm (.475”) and as large as 19mm (.750”). This range covers virtually all aluminum and steel bars/clip-ons.*Whenever possible we recommend mounting the Hindsight Billet Bar End Mirror with the basic mount which clamps to the outer diameter of a 7/8” handlebar/clip-on. Using the basic mount is the bar end mirror solution using the fewest parts, facilitates the easiest installation and removal, is the lightest weight, and provides for the most secure bar end mirror mounting. Use of the basic mount requires having 10mm (3/8”) of bare bar outboard of the grip/throttle assembly. Before purchasing the mirror adapter, try moving your grips and controls inboard (away from the end of the bar). In many applications, the mirror can be mounted with the basic mount.
1A-200
1" In Stock
This is the Billet Internal Adapter for the Arrow, Hindsight, Hindsight LS and Blindsight Billet Bar End Mirrors. We make this assembly to offer an alternative to the basic Bar End Mirror mount.
The 1" Adapter kit assembly will work on bars with internal diameters as small as 18.3mm (.720") and as large as 22.25mm (.876"). This range covers typical Harley Davidson bars. Not recommended for sport bike applications (use 7/8" version).
* PLEASE NOTE THIS PART COMES INDIVIDUALLY. if you are wanting to fit two mirrors you will require TWO billet mirror adaptors